FlowStation™
FlowStation™

A Powerful Solution for Shared Flow

The FlowStation is a powerful shared flow controller that allows up to 20 BaseStation 3200 irrigation controllers to share water resources. Whether you have one large mainline across a property, or you are combining controllers across multiple mainlines, the FlowStation offers the features and flexibility to tackle the job.

 

With the FlowStation, you can share up to 20 separate water sources and 20 separate control points with each control point assigned to one of 40 shared mainlines. The FlowStation will intelligently manage each mainline and allocate water resources among the connected BaseStation 3200 controllers.

 

Advanced Features for Irrigation Water Management

Flow Monitoring: With the FlowStation, you have the ability to monitor for high and unexpected flow events. The FlowStation will take action when a flow fault is detected and discontinue use of the faulted control point.
 

Flow Management: The FlowStation maximizes the number of valves and controllers that can operate at once based on the amount of water that is available which dramatically reduces water windows.
 

Site Management: The FlowStation supports advanced features such as program priorities, start, stop and pause conditions, and water budgets.
 

Remote Control: With the FlowStation App you can remotely configure and manage your FlowStation from a desktop, tablet, or mobile device.

Get quick access to program controllers, share flow between them, and then manage the entire scope of hydraulics.

The FlowStation App is a cloud-based, shared-flow configuration and programming app that allows you to easily:

  • Design flows for Water Sources, Control Points, and Mainlines
  • Define operational delays based on time or pressure for system stabilization
  • Assign Zones to Mainlines for optimized flow resolution

To access the FlowStation App, you must have an AppManager account and an active FlowStation App subscription (part number: BL-APPMGR-FL).

 

FlowStation Specifications

FlowStation Display Features

  • High contrast 3.25” backlit mono LCD screen
  • Screen resolution 128x64 pixels
  • Screen LCD brightness of 250 lumens for easy viewing in direct sunlight

FlowStation Features

The FlowStation can share:

  • Water resources with as many as 20 BaseStation 3200 irrigation controllers
  • Up to 20 separate water sources
  • Up to 20 separate control points
  • Up to 40 separate mainlines

 

FlowStation Programmable Features

You can assign the shared water sources, control points, mainlines, and BaseStation 3200 irrigation controllers from the FlowStation main display or from Baseline’s FlowStation App™ (with a paid subscription).

Note: For more information about the FlowStation App, refer to Baseline’s Central Control Technical Specification.

Water Sources

You can set up the water sources from the FlowStation main display or from the FlowStation App.

  • Enable/disable each water source
  • Set a priority for each water source. The priority setting controls how water is allocated to controllers.
  • Set a water budget limit for each water source and set the water source to shut down if the water budget is exceeded
  • Set up an empty condition for the water source. Water sources have empty conditions monitored by moisture sensors, event switches, and pressure sensors

Control Points

You can set up the control points from the FlowStation main display or from Baseline’s FlowStation App.

  • Enable/disable each control point
  • Set a target flow for each control point
  • Set flow limits for each control point
    • Set a limit for high flow through this control point
    • Set the control point to shut down if the high flow limit is exceeded
    • Set a limit for unscheduled flow through this control point
    • Set the control point to shut down if the unscheduled flow limit is exceeded
  • Set up pressure limits for each control point
    • Set a high pressure limit on this control point
    • Set the control point to shut down if the high pressure limit is exceeded
    • Set a low pressure limit on this control point
    • Set the control point to shut down if the low pressure limit is exceeded

Mainlines

You can set up the mainlines from the FlowStation main display or from Baseline’s FlowStation App.

  • Enable/disable each mainline
  • Set a maximum flow limit for each mainline. The flow is dynamically allocated to the controllers.
  • Set a priority for each mainline
  • Specify the pipe fill stabilization for each mainline in seconds or by pressure (PSI)
  • Set basic and advanced flow variance parameters for each mainline
  • Set delays for zones on each mainline

Hydraulic System Configuration

In the FlowStation, you can assign the following hydraulic system components:

  • Water source to a control point
  • Control point to a mainline
  • Mainline to a mainline
  • Mainline to a control point

FlowStation Reports

Controller Status

  • Status of each connected controller
  • Controller number
  • Controller serial number
  • Controller MAC address
  • Requested/Assigned Flow (alternates every 30 seconds)
  • Requested/Assigned Concurrent (alternates every 30 seconds)
  • Controller description

Controller Mainline Status

  • Status of each controller mainline
  • Controller mainline number
  • Requested/Assigned Flow (alternates every 30 seconds)
  • Requested/Assigned Concurrent (alternates every 30 seconds)

Booster Pump Status

  • Status of each booster pump
  • Booster pump number
  • Booster pump description

Control Point Status

  • Status of each control point
  • Control point number
  • Control point reported GPM flow rate
  • Control point reported usage in gallons
  • Control point reported PSI
  • Control point description

Water Source Status

  • Status of each water source
  • Water source number
  • Total usage reported from all assigned control points
  • Water source description

FlowStation Messages

Messages notify you when something in your system needs your attention, such as an error on the controller that affects all programs, a disconnected controller, or a flow fault.

BaseStation 3200 Features for Shared Flow

Note: Complete details for the BaseStation 3200 V17 irrigation controller are found in the BaseStation 3200 V17 Technical Specifications.

Operating Features for Shared Flow

  • When a start condition is met for any one of the BaseStation 3200’s shared schedules, the controller requests water from the FlowStation. If the FlowStation determines there is adequate water available, it will allocate the water to the requesting controller’s schedule. If water is not available, the schedule will wait until the FlowStation allocates water before it begins.
  • The FlowStation allocates water based on the priority setting for the shared water sources.
  • Booster pumps that are configured on the BaseStation 3200 and assigned to the FlowStation can be started when water is used from the shared control point.
  • If a shared control point has a high flow or high pressure shutdown event, the controller will shut down the control point and notify the FlowStation immediately.
  • If a configuration change is made to the BaseStation 3200, the change will be sent to the FlowStation.
  • When a control point is assigned to the FlowStation, it maintains all the settings that were assigned on the BaseStation 3200 except priority and rationing.

Programmable Features for Shared Flow

  • In the BaseStation 3200, the user can assign any/all of the following hydraulic components to the FlowStation:
    • Water sources
    • Control points
    • Mainlines
  • When the hydraulic component is assigned to the FlowStation, it is known as a "shared" resource and is labeled with "Managed by the FlowStation." When the hydraulic component is assigned to the BaseStation, it is known as a “local” resource and is labeled with "Managed locally."

FlowStation System Backup & Restore

  • You can export all FlowStation data to a USB flash drive or to BaseManager (with a paid subscription).
  • You can also restore all FlowStation programming information directly from a USB flash drive or from BaseManager.

Communication Requirements

  • The FlowStation requires a static IP address on the network, and each BaseStation 3200 will need to have an IP address on the network.
  • The BaseStation 3200 can be assigned a static IP address, or it can operate in DHCP mode.
  • Each BaseStation 3200 is assigned to a FlowStation by programming the IP address of the FlowStation into the controller.
  • Where an existing network is not available, a radio network can be set up using Baseline Ethernet radios or Wi-Fi communication modules. Access to the Internet is not required. Please see the Ethernet Radio Technical Specification and the Wi-Fi Module Technical Specification for more information.

Information Security Controls

The FlowStation includes information security controls that enable secure networking with other Baseline products.

To learn more about the FlowStation security controls, refer to the Baseline Security Controls Technical Specification.

 

Electrical Specifications

Power Specifications

The FlowStation comes standard with a 120 VAC transformer, which has apparent power of 12 VA.

Surge

  • Up to 5 levels of surge protection built into the controller boards
  • Minimum surge response time of 1 picosecond

 

Enclosure Options

 “X” Cabinet—Wall Mount Enclosure

  • Dimensions: 15.50” x 12.38” x 6.40”
  • 16 Gauge, powder-coated

 

“XS” Cabinet—Wall Mount Enclosure

  • Dimensions: 15.50” x 12.38” x 6.40”
  • 16 Gauge, 304-grade stainless steel

 

“P” Pedestal Enclosure

  • Dimensions: 17.38” x 36.25” x 12.63”
  • 16 Gauge, 304-grade stainless steel


“PSS” Super Strong Pedestal Enclosure

  • Dimensions: 16” x 38” x 15.5”
  • 16 Gauge, 304-grade stainless steel

Enclosure Notes

  • FlowStations in the "X" and "XS" enclosures are large enough to hold the controller and a communication module. The communication module will be built into the enclosure by the factory when ordered together.
  • Baseline recommends that "X" or "XS" enclosures be specified when a wall-mount enclosure and communication modules are required.
  • The FlowStation is not available as a stand-alone unit in a pedestal enclosure. It can be installed as an add-on module in a BaseStation 3200 pedestal enclosure.
  • When adding a FlowStation into the enclosure of a BaseStation 3200 pedestal, the communication module should be specified as part of the controller. Refer to the BaseStation 3200 Configuration and Specification Guide for more information.

Brochures:

Features and benefits of the FlowStation advanced flow management controller

Spec Docs:

Specification information for surge arrestors and grounding
A comprehensive overview of how all the parts and pieces of a FlowStation and a BaseStation 3200 irrigation controller fit together.
Technical specifications and data for the Legacy FlowStation shared flow controller with V1 firmware
Technical specifications and data for the FlowStation shared flow controller with V2 firmware
Technical details for AppManager, the central control application framework from Baseline. Includes information about BaseManager, PipeView, and the FlowStation App
This document helps specifiers determine the necessary components for a solar-powered irrigation controller system
Technical details for the DC/solar-powered irrigation controllers manufactured by Baseline
Technical specifications and data for the FlowStation shared flow controller with V3 firmware
Technical details for the industry standard security controls that Baseline has implemented in products that talk to each other and to the server
General specification information for Baseline's grounding requirements in Microsoft Word format. Suitable for including in specifier's documentation.
General specification information for Baseline's grounding requirements in Microsoft Word format. This non-proprietary spec does not give the manufacturer's name or the brand name of a product, which enables the irrigation designer to specify Baseline products while complying with the requirements in the bidding documents.
General specification information for Baseline's legacy shared flow controller in Microsoft Word format. Suitable for including in specifier's documentation.
General specification information for Baseline's legacy shared flow controller in Microsoft Word format. This non-proprietary spec does not give the manufacturer's name or the brand name of a product, which enables the irrigation designer to specify Baseline products while complying with the requirements in the bidding documents.
General specification information for Baseline's shared flow controller in Microsoft Word format. Suitable for including in specifier's documentation.
General specification information for Baseline's shared flow controller in Microsoft Word format. This non-proprietary spec does not give the manufacturer's name or the brand name of a product, which enables the irrigation designer to specify Baseline products while complying with the requirements in the bidding documents.
General specification information for DC irrigation controllers in Microsoft Word format. This non-proprietary spec does not give the manufacturer's name or the brand name of a product, which enables the irrigation designer to specify Baseline products while complying with the requirements in the bidding documents.
General specification information for Baseline's shared flow controller in Microsoft Word format. Suitable for including in specifier's documentation.
General specification information for Baseline's shared flow controller in Microsoft Word format. This non-proprietary spec does not give the manufacturer's name or the brand name of a product, which enables the irrigation designer to specify Baseline products while complying with the requirements in the bidding documents.

Support Docs:

Instructions for using the FlowStation App to remotely configure and manage your FlowStation from a desktop computer, tablet, or mobile device
User manual for the Legacy FlowStation - Baseline's shared flow controller with V1 Firmware
This document describes the steps for downloading a firmware update from the Baseline website and applying it to the FlowStation.
Guide for getting your Legacy FlowStation shared flow controller with V1 firmware set up
Using a ground resistance tester to determine the ground resistance at your irrigation site
Use this printable document to gather the information that you are required to submit on the online Extended Warranty Application form. Note: Baseline does not accept faxed or printed warranty applications.
User manual for the BaseStation 3200 irrigation controller with V16 firmware
Guide for getting your BaseStation 3200 irrigation controller with V16 firmware set up
User manual for the FlowStation - Baseline's shared flow controller
Guide for getting your FlowStation shared flow controller set up
User manual for the FlowStation - Baseline's shared flow controller
Guide for getting your FlowStation shared flow controller set up
Guide for getting your BaseStation 3200 irrigation controller with V17 firmware set up
User manual for the BaseStation 3200 irrigation controller with V17 firmware
Shows firmware versions and compatibility for Baseline irrigation controllers and performance components
Information about the advanced security protocols that ensure all communication between our products is secure
Instructions for updating your Baseline products to take advantage of enhanced security

Case Studies:

A look at how Clif Bar Baking Company uses Baseline products to manage their facility in Twin Falls, Idaho
A look at how the City of Boise uses Baseline products to manage Esther Simplot Park in Boise, Idaho
A look at how FMC Technologies uses Baseline products to manage their corporate campus in Houston, Texas
A look at how Sanger Unified School District uses Baseline products to manage their school grounds and athletic fields

Spec Drawings:

Detail for grounding a pedestal enclosure for a Baseline irrigation controller.
Detail for grounding Baseline's wall mount enclosures
Mounting detail for pedestal enclosures
Detail for mounting a C cabinet for a Baseline irrigation controller
Details for mounting an X cabinet for a Baseline irrigation controller
Detail for grounding Baseline's wall mount enclosures
Detail for grounding a pedestal enclosure for a Baseline irrigation controller
Detail for mounting a C cabinet for a Baseline irrigation controller
Mounting Detail for Pedestal Enclosures
Drawing and photo of the BL-XP pedestal base compatible with BaseStation 3200, BaseStation 1000, and BL-5200 Series Powered biCoders in X Series metal wall mount enclosures

Install Guides:

Instructions for installing a P-16SS pedestal for an irrigation controller
Instructions for installing a C cabinet enclosure that will house a Baseline controller
Instructions for installing a P pedestal enclosure that will house a Baseline controller
Instructions for installing an X cabinet enclosure that will house a Baseline irrigation controller
Instructions for installing the X cabinet on a pedestal
Instructions for installing a Shared Flow biCoder on the two-wire path
Instructions for installing a FlowStation module as an add-on to a BaseStation 3200 controller in a pedestal
Instructions for installing an Ethernet switch in a Baseline pedestal enclosure
General guidelines for installing a DC/solar powered irrigation controller system

FlowStation Shared Flow Controller

Share up to 20 separate control points and assign each control point to one of 40 shared mainlines. Water can be managed and allocated among 20 BaseStation 3200 irrigation controllers. Specify one FlowStation for each shared flow group.

 

Part Number: BL-FLOWSTN

 

FlowStation App

The FlowStation App is a cloud-based, shared-flow configuration and programming application within the AppManager framework.

 

Part Number: BL-APPMGR-FL