Baseline Advanced Programming & Training Videos

Baseline delivers innovative and reliable irrigation solutions for any application from simple to the most complex. What sets our solution apart is its ability to automatically and precisely gauge when and how much plants need to be watered.

Our irrigation systems can run out of the box, or be fine tuned to achieve the highest level of water conservation possible. Below are some resources to help you implement upgrades and program modifications to get the most efficient irrigation possible. Our experienced support staff is also on hand to answer your questions.

  

Advanced Programming Options

Baseline Solutions for Keeping a Pond or Cistern Full

BaseStation 3200 – Keeping a Pond or Cistern Full with a Start Condition
BaseStation 1000 – Keeping a Pond or Cistern Full with a Start Condition
BaseStation 3200 – Pausing Irrigation to Allow a Pond or Cistern to Refill
Rainwater Harvesting and Use

 

Baseline Solutions for Irrigating from a Pond or Cistern

BaseStation 3200 – Shutting Down Irrigation Due to Low Water in a Pond or Cistern
BaseStation 1000 – Shutting Down Irrigation Due to Low Water in a Pond or Cistern
BaseStation 3200 – Shutting Down Irrigation Based on a POC Empty Condition

 

Baseline Solutions for Dealing with Water Restrictions

BaseStation 3200 – Setting Up POC Priorities

 

Turning Electricity On/Off with a Program

 

Baseline's Training Videos

Working with the BaseStation 1000 Irrigation Controller

BaseStation 1000 Basic Programming Tutorial
BaseStation 1000 – Setting the Date & Time
BaseStation 1000 – Searching for and Assigning Devices
BaseStation 1000 – Configuring Concurrent Zones
BaseStation 1000 – Enabling or Disabling a Program
BaseStation 1000 – Setting a Seasonal Adjustment for a Program
BaseStation 1000 – Testing Devices and the Two-Wire

Working with the BaseStation 3200 Irrigation Controller

BaseStation 3200 – Assigning Zones
BaseStation 3200 – Configuring Zones
BaseStation 3200 – Setting Up Programs
BaseStation 3200 – Setting Up Points of Connection
BaseStation 3200 – Setting Up Mainlines
BaseStation 3200 – Learning Flow
BaseStation 3200 – Setting Up Soil Moisture Sensors
BaseStation 3200 – Setting Up Start, Start, Pause Conditions

Working with BaseManager™

Selecting a Controller
Assigning Zones and Other Devices
Adding a New Program
Performing Manual Operations
Setting Up a Map
Testing Devices

Working with WeatherAccess™

Enabling Weather-Based Watering on a BaseStation 1000
Enabling Weather-Based Watering on a BaseStation 3200
Connecting a Weather Station to BaseManager
Configuring Zone Properties for Weather-Based Watering

Working with the BaseStation 6000 Irrigation Controller

BaseStation 6000 – Configuring a Zone
BaseStation 6000 – Configuring a Remote Base Unit (Serial Connection)